PUNCH mixing ratio

[BGCD]

If you are using Punch only to clean what are the correct mixing dilutions? Heavy, Medium, and Light soiling.

And if you want to add Punch to DS2. How do you guys mix it?

Thanks

[encapman]

No need to add Encap-Punch to Encap-Clean DS2. You'll see better results using it as a pre-spray ahead of your normal cleaning with Encap-Clean DS2

Here are the directions for using Encap-Punch...

TRAFFIC LANE PRE-SPRAY:
Light Soil = 8 oz 1:16 per gal of hot water
Medium Soil = 10 oz 1:12 per gal of hot water
Heavy Soil = 12 oz 1:10 per gal of hot water

HOT WATER EXTRACTION RINSE DETERGENT:
Truckmount: 40 oz per 5 gal of stock solution
Portables: 1-2 oz per gal of hot water

BONNET / PAD CLEANING:
8 ounces per gal of hot water

[BGCD]

Thanks Rick.