My pile lifter and Orbot just sits in the shop. Never been stored outside.
Orbot has sprayer and 21" kit. Never used 21" kit because I never had a big enough job. Machine hardly used. Been sitting at least 2 years. since last use.

X-Vac has less then 5 hours just sits as well. last time used is about almost a year ago on a 5x8 wool rug. (For 15 minutes) Brush has always been stored off the ground in shop. Brush is 99%.

I never generated enough business to put tools to use. Don't look like i will no time soon either.
They both in like new condition.

Orbot less than 5 hours with (21" kit never used) (21" cotton bonnets and micro fiber all brand new) bonnets came with orbot. $2000

Xvac Pile lifter - $1800

Al@KleenOgreen.com

I have a hos orbot with the sprayborg,not quite as a cimex but was wondering how much per sq.ft. to charge for maintaining commercial berber.It usually takes longer the first time because they always wait way too long.Don't know if it matters but I live in Michigan & eventually want to get a cimex when our business gets going steady...

I have a client that moved from the midwest down to AZ. He is asking if anyone that uses the same process and cleaning products is down in his area now for future cleaning. Please let me know.

Thanks

It's been a while since I been on the board, been taking care of a bunch of personal things anyways hope everyone did well last year, hopefully everyone will double or triple this 2014 year.

Happy New Year!!!

I posted is on the US board and was checking out the CRS's here. Love to know the differences. I've been looking at different CRB machines. Seems there is a big difference in price from the Strong and Powr-flite units. I'm not really looking at price but more or less the specifications on the units. I've had used Powr-flite products and am very happy with them (as far as vacuums go). I'd like to hear your thoughts. BTW, these are really the only two that I've come across as of this point. If you have other suggestions, please let me know. Thank you

Bush Flying in the Pacific - -Papua...well worth a look


For all the flyers out there!


Entrusting one's life to a single engine at its best. Gotta love them stone age flight attendants. Be sure to watch both videos.


Bush flying at its best!

http://vimeo.com/58091041

http://vimeo.com/65135209

Enjoy,

Short 1

Greetings and Happy New Year ~

Is the Lowboy suitable for tile and grout cleaning? Is there a grout brush attachment available?

Does anyone have experience with the spray system for the CRB machine? If so, what do you like or not like about it?

Does any battery sprayer work with it (backpack or other)? I like the FlexiPro and the Penguin, but don't have $500 to spend on a sprayer. If so, are any additional connections needed?

What is the cost of the system?

Any other information would be appreciated.

Happy New Year to all!

Been thinking for a while on how and where I can store my spare drive boards, brushes and pads for Big Yella.

So today I had a bit of spare time, (oh, BTW, it's now 22:11 & I just got home).

Anyhow, I found a spare piece of plywood and butchered it.

Here's the end result.

I cut holes in the panel so I can see when the pads are getting low, also, I don't have to reach over the top, simply pull them through the hole.

This will hold three drive boards & fifteen plus pads to the rear.

Towards the front, three brushes & again fifteen plus Max pads.



There's still plenty of room for Big Yella, Sprayborg, ramps and other gear that is all accessed from the rear lift-up door.



I just never seem to get the time to complete everything, been trying to have it all painted for several months.

Ah well......................

Short 1

Well, my Steelers needed a win, a Dolphins loss, a Ravens loss and now KC is beating the Chargers in the 4th qtr.

Will the Steelers be in the playoffs?