I want to use Hydrox with a HWE

Hot Water Extraction: Mix Encap-HydrOx at 1-2 oz per gallon in portable extractors.

How would you pretreat the area first?? (New to Encap).

I presume that many of us carry a device that is battery powered.

We all probably have many batteries floating around.

How do you tell, if you don't have a multi-meter, which battery is worth keeping.?

This is a simple test, (I love simple).

Now I haven't tested this, so I don't know if it's true.

Check it out.

http://www.youtube.com/embed/Y_m6p99l6ME...r_embedded

Short 1

There are times when I would like to use a high profile or "loopy" type string bonnet on my Orbot. I find that type of bonnet folds under the machine and does not work at all. I have tried a glide with no success as well. These tend to work well on standard 175 machines. Has anyone had any success using these type of string bonnets on orbital machines and what is your secret? Thanks!

Lee

I received a call asking for a carpet cleaning estimate for the North Lake Library District in North Lake Illinois - a bit west of Chicago and somewhat far for me to go .

Is anyone in that area who wants to do a library system?

http://www.northlakelibrary.org/

Call Rich ~ 708-562-2301

You can use me as a referral - I was recommended through OCLC.

Releasit Encap Spot Cleaner ran out today, Is this Completely Different from all other Releasit products can you make your own spotter up.As I have Hydrox,Punch.DS2. I know Hydrox can be made up as a spotter.

Well i have to say on this side of the pond (UK) there are mixed feelings about encap as a cleaning process. I recently took the challenge of trying releasit DS2 and using Hydrox as a spotter. The results were stunning. I am well impressed with it. Did an office yesterday, excellent result. End of tenancy domestic polyprop that i was pretty dirty, turned out great. Another office in the morning and i cant wait to get started with it.
Office tomorrow is pretty dirty. Not sure if i should use DS2 and spot with Hydrox or just hydrox the lot. Your thoughts?
Encap novice

Saw these used ones. Seller does not know what they are from.
http://www.ebay.com/itm/THREE-MULTI-DISC...565b8c99b2


looks like a great deal on some Cimex drivers

I have about 1/2 inch of play between the outside of the spring loaded aluminum mounts and the inside of the wheels. The axle is free floating and slides from side to side during cleaning. You can clearly see the aluminum is transferring onto the steel axle were it's sliding back and forth. Should these areas be lubricated? Will the aluminum "egg" out?

Does anyone use the different brushes I might have alot of tile pool showers kitchens areas to clean which brushes Ie theYellow Poly/Bronze Mix or the Nylo Grit Scrub Brush.for the heavy dirty areas.New to the Cimex machine.

Is anyone getting good results with their CRB on commercial glue down?

If so what are you using?

Brushes, Chemicals, Dwell time, On board sprayer or pump up sprayer etc.

Thanks